Dimensional Charts

Need help finding the right product for your requirements? By using the charts below, you can quickly scan our inventory of connector gaskets.

MIL-DTL 38999

MIL-DTL-38999 (formerly MIL-C-38999) describes four series of miniature, electrical connectors. The connectors are intended for use as follows: Series I connectors are used where a quick disconnect coupling system is required for blind mating or other mating problem areas, and these connectors provide high-vibration characteristics and are suitable for severe wind and moisture problem (SWAMP) areas with proper connector accessories; Series II connectors are used where the connector is not subjected to high vibration or SWAMP areas and where space or weight is at a premium due to their lower profile; Series III connectors are suitable for blind mating areas, and provide high-vibration characteristics at elevated temperature and are suitable for SWAMP areas with the proper connector accessories; and Series IV connectors are used where a quick disconnect coupling system is required for blind mating or other mating problem areas, and these connectors provide high-vibration characteristics and are suitable for SWAMP areas with the proper connector accessories.

MAJR - Gaskets Measurements

Dimensional Characteristics

  • EMI/RFI Shielding Connector Gasket – This figure shows an outline drawing of the typical connector gasket.
  • Connector gasket thickness for all parts listed is .032″.
  • Dimension “E” displays oval slots were applicable on table #1.
MIL-DTL 38999 SeriesDimensions (inches)MILITARY PART NUMBERMAJR Part Numbers [Material Options]
Shell SizeIIIIIIIVABDDEMIL P/N: M83528/004B[  ]Ag/Al SiliconeNi/Graphite Silicone
60.4690.3750.7380.1410.1410012050-60601-632050-60601-52
8X0.5940.6300.8400.1350022050-60802-632050-60802-52
80.5940.5680.8120.1250032050-60803-632050-60803-52
80.5940.5000.8750.1560042050-60804-632050-60804-52
9X0.7190.7500.9650.1350052050-60903-632050-60903-52
9X0.7190.7500.9650.1350.2222050-60904-632050-60904-52
10X0.7190.7500.9650.1352050-61003-632050-61003-52
100.7190.680.9370.1250062050-61004-632050-61004-52
100.7190.6251.0000.1560072050-61005-632050-61005-52
11XX0.8120.8751.060.1410082050-61101-632050-61101-52
11X0.8120.8751.060.1410.2062050-61103-632050-61103-52
12X0.8120.8751.060.1412050-61202-632050-61202-52
120.8130.7501.0940.1560092050-61203-632050-61203-52
13XX0.9061.0051.1530.1350102050-61305-632050-61305-52
13X0.9061.0001.1560.1410.2062050-61306-632050-61306-52
14X0.9061.0051.1530.1352050-61401-632050-61401-52
140.9060.9381.1250.1250112050-61402-632050-61402-52
140.9060.8751.1880.1560122050-61403-632050-61403-52
15XX0.9691.1351.2580.1560132050-61501-632050-61501-52
15X0.9691.1351.2580.1560.2062050-61503-632050-61503-52
16X0.9691.1351.2580.1562050-61602-632050-61602-52
160.9691.0631.250.1250142050-61603-632050-61603-52
160.9691.0001.2810.1562050-61604-632050-61604-52
17XX1.0621.2601.3510.1560162050-61701-632050-61701-52
17X1.0621.2601.3510.1560.2222050-61703-632050-61703-52
18X1.0621.2601.3510.1562050-61801-632050-61801-52
181.0621.1891.3430.1250172050-61802-632050-61802-52
181.0621.1351.3750.1560182050-61803-632050-61803-52
19XX1.1561.3751.5000.1410192050-61901-632050-61901-52
19X1.1561.3751.5000.1410.2062050-61903-632050-61903-52
201.1561.3751.5000.1412050-62002-632050-62002-52
20X1.1561.3121.4670.1250202050-62003-632050-62003-52
201.1561.2501.5000.1720212050-62004-632050-62004-52
21XX1.2501.5001.6250.1410222050-62101-632050-62101-52
21X1.2501.5001.6250.1410.2062050-62103-632050-62103-52
22X1.2501.5001.6250.1412050-62202-632050-62202-52
221.2501.4371.5620.1250232050-62203-632050-62203-52
221.2501.3751.6250.1720242050-62201-632050-62201-52
23XX1.3751.6251.7500.1720252050-62301-632050-62301-52
23X1.3751.6251.7500.1720.2592050-62303-632050-62303-52
24X1.3751.6251.7500.1722050-62402-632050-62402-52
241.3751.5631.7030.1520262505-62403-632050-62403-52
241.3751.5001.7500.2030272050-62401-632050-62401-52
25XX1.5001.7501.8750.1720282050-62502-632050-62502-52
25X1.5001.7501.8750.1720.2592050-62503-632050-62503-52
281.5621.7502.0000.2030292050-62801-632050-62801-52
291.5682.0002.1710.1720.1952050-62901-632050-62901-52
321.7502.0002.2500.2190302050-63201-632050-63201-52
331.7342.1872.3560.2030.2342050-63301-632050-63301-52
361.9382.2502.5000.2190312050-63601-632050-63601-52
402.1882.5002.750.2190322050-64001-632050-64001-52
442.3752.7813.0000.2190332050-64401-632050-64401-52
482.6253.0313.250.2190342050-64801-632050-64801-52

M83528

MIL-DTL-83528 is a U.S. military specification (MIL-SPEC) for electrically-conductive, elastomeric shielding gaskets that suppress EMI and radio frequency interference (RFI). This MIL-SPEC establishes minimum levels of plane wave shielding effectiveness at 10 GHz over a continuous-use temperature range. M83528/004 specifies standard sizes of flange mount EMI connector gaskets. These gaskets can be provided in a variety of material listed within the MIL-DTL-83528 spec.

Our Military grade product offer is the Silver/Aluminum filled silicone type B material per the m83528 spec. Additional material options such as type A,C,D,M, ect. may be available, below please contact us to inquire on a different material type.

MAJR - Gaskets Measurements

Dimensional Characteristics

  • EMI/RFI Shielding Connector Gasket – This figure shows an outline drawing of the typical connector gasket.
  • Connector gasket thickness for all parts listed is .032″.
  • Dimension “E” displays oval slots were applicable on table #1.
MIL-DTL 38999 SeriesDimensions (inches)MILITARY PART NUMBERMAJR Part Numbers [Material Options]
Shell SizeIIIIIIIVABDDEMIL P/N: M83528/004B[  ]Ag/Al SiliconeNi/Graphite Silicone
60.4690.3750.7380.1410.1410012050-60601-632050-60601-52
8X0.5940.6300.8400.1350022050-60802-632050-60802-52
80.5940.5680.8120.1250032050-60803-632050-60803-52
80.5940.5000.8750.1560042050-60804-632050-60804-52
9X0.7190.7500.9650.1350052050-60903-632050-60903-52
9X0.7190.7500.9650.1350.2222050-60904-632050-60904-52
10X0.7190.7500.9650.1352050-61003-632050-61003-52
100.7190.680.9370.1250062050-61004-632050-61004-52
100.7190.6251.0000.1560072050-61005-632050-61005-52
11XX0.8120.8751.060.1410082050-61101-632050-61101-52
11X0.8120.8751.060.1410.2062050-61103-632050-61103-52
12X0.8120.8751.060.1412050-61202-632050-61202-52
120.8130.7501.0940.1560092050-61203-632050-61203-52
13XX0.9061.0051.1530.1350102050-61305-632050-61305-52
13X0.9061.0001.1560.1410.2062050-61306-632050-61306-52
14X0.9061.0051.1530.1352050-61401-632050-61401-52
140.9060.9381.1250.1250112050-61402-632050-61402-52
140.9060.8751.1880.1560122050-61403-632050-61403-52
15XX0.9691.1351.2580.1560132050-61501-632050-61501-52
15X0.9691.1351.2580.1560.2062050-61503-632050-61503-52
16X0.9691.1351.2580.1562050-61602-632050-61602-52
160.9691.0631.250.1250142050-61603-632050-61603-52
160.9691.0001.2810.1562050-61604-632050-61604-52
17XX1.0621.2601.3510.1560162050-61701-632050-61701-52
17X1.0621.2601.3510.1560.2222050-61703-632050-61703-52
18X1.0621.2601.3510.1562050-61801-632050-61801-52
181.0621.1891.3430.1250172050-61802-632050-61802-52
181.0621.1351.3750.1560182050-61803-632050-61803-52
19XX1.1561.3751.5000.1410192050-61901-632050-61901-52
19X1.1561.3751.5000.1410.2062050-61903-632050-61903-52
201.1561.3751.5000.1412050-62002-632050-62002-52
20X1.1561.3121.4670.1250202050-62003-632050-62003-52
201.1561.2501.5000.1720212050-62004-632050-62004-52
21XX1.2501.5001.6250.1410222050-62101-632050-62101-52
21X1.2501.5001.6250.1410.2062050-62103-632050-62103-52
22X1.2501.5001.6250.1412050-62202-632050-62202-52
221.2501.4371.5620.1250232050-62203-632050-62203-52
221.2501.3751.6250.1720242050-62201-632050-62201-52
23XX1.3751.6251.7500.1720252050-62301-632050-62301-52
23X1.3751.6251.7500.1720.2592050-62303-632050-62303-52
24X1.3751.6251.7500.1722050-62402-632050-62402-52
241.3751.5631.7030.1520262505-62403-632050-62403-52
241.3751.5001.7500.2030272050-62401-632050-62401-52
25XX1.5001.7501.8750.1720282050-62502-632050-62502-52
25X1.5001.7501.8750.1720.2592050-62503-632050-62503-52
281.5621.7502.0000.2030292050-62801-632050-62801-52
291.5682.0002.1710.1720.1952050-62901-632050-62901-52
321.7502.0002.2500.2190302050-63201-632050-63201-52
331.7342.1872.3560.2030.2342050-63301-632050-63301-52
361.9382.2502.5000.2190312050-63601-632050-63601-52
402.1882.5002.750.2190322050-64001-632050-64001-52
442.3752.7813.0000.2190332050-64401-632050-64401-52
482.6253.0313.250.2190342050-64801-632050-64801-52

MIL-DTL 5015

MIL-DTL-5015 is a military specification covering electrical circular connectors with solder or removable crimp contacts (both front and rear release). These connectors are for use in electronic, electrical power, and control circuits and are used in large numbers for defense, civil, and industrial applications due to their versatility, reliability, and ease of supply.

Our Military grade product offer is the Silver/Aluminum filled silicone type B material. For more material options not shown below please contact us.

MAJR - Gaskets Measurements

Dimensional Characteristics

  • EMI/RFI Shielding Connector Gasket – This figure shows an outline drawing of the typical connector gasket.
  • Connector gasket thickness for all parts listed is .032″.
  • Dimension “E” displays oval slots were applicable on table #1.
DimensionsMaterial Options
 Commercial GradeMilitary Grade
Shell SizeABCDNi / Graphite SiliconeAg / Al Silicone
80.5940.5000.8750.1722050-40213-522050-40213-63
100.7190.6251.0000.1722050-40214-522050-40214-63
120.8130.7501.0940.1722050-40215-522050-40215-63
140.9060.8751.1880.1722050-40216-522050-40216-63
160.9691.0001.2810.1722050-40217-522050-40217-63
181.0631.1251.3750.2032050-40218-522050-40218-63
201.1561.2501.5000.2032050-40219-522050-40219-63
221.2501.3751.6350.2032050-40220-522050-40220-63
241.3751.5001.7500.2032050-40221-522050-40221-63
281.5631.7502.0000.2032050-40222-522050-40222-63
321.7502.0002.2500.2192050-40223-522050-40223-63
361.9382.1882.5000.2192050-40224-522050-40224-63
402.1882.4382.7500.2192050-40225-522050-40225-63
442.3752.7813.0000.2192050-40226-522050-40226-63
482.6253.0313.2500.2192050-40227-522050-40227-63

D-Subminiature

D-Subminiature is a electrical connector that contains two or more parallel rows of pins or sockets usually surrounded by a D-shaped metal shield that provides mechanical support, ensures correct orientation, and may screen against electromagnetic interference. The section containing pin contacts is commonly called the plug, while that containing socket contacts is called the or socket. The socket’s shield fits tightly inside the plug’s shield. D-subs mounted connectors usually have threaded nuts that accept screws on the cable end connector cover that are used for locking the connectors together and offering mechanical strain relief.

D Subminiature Measurements

Dimensional Characteristics

  • EMI/RFI Shielding Connector Gasket – This figure shows an outline drawing of the typical connector gasket.
  • Connector gasket thickness for all parts listed is .032″.
DimensionsMaterial Options
 Commercial GradeMilitary Grade
Shell SizeABCDEFNi / Graphite SiliconeAg / Al Silicone
9 PIN1.2130.5940.9840.120.6970.362050-19334-522050-19334-63
15 PIN1.5560.61.3120.131.080.372050-19335-522050-19335-63
25 PIN2.0870.61.8520.121.5830.3782050-19336-522050-19336-63
37 PIN2.7290.62.50.122.2310.3782050-19337-522050-19337-63
50 PIN2.6350.62.4060.122.1090.4662050-19338-522050-19338-63